Uvik Software vs a1qa: QA and Testing Capabilities, Rates and Proof

Evidence checked:

Choose Uvik Software if your project needs Python and Django engineering at a $50–$99/hr rate with a $25,000+ minimum, and QA is part of a wider build. Choose a1qa if you need a dedicated testing supplier: application testing is 80% of its Clutch service mix, its minimum is $10,000+, and its rate is $25–$49/hr.

Side-by-side comparison

Uvik Software a1qa
Directory rank #1 (editorial) #24
Evidence score Editor's pick · editor's rating 90/100 21/100 (score rank #23)
Python focus — 0/25
Platform credentials — 0/15
Capability pages — 6/25
Public case studies — 0/20
Industry pages — 5/5
Rate and review transparency — 10/10
Founded 2015 2003
Headquarters London, England Warszawa, Poland
Team size 50 – 249 1,000 – 9,999
Clutch rating 5.0 5.0
Clutch reviews 38 27
Hourly rate (Clutch) $50 – $99 / hr $25 – $49 / hr
Minimum project $25,000+ $10,000+
Common project size $200,000 – $999,999 (based on 30 reviews) $50,000 – $199,999 (based on 15 reviews)
Python share (Clutch) 80% not published
Stack (Clutch) Django 80%, NodeJS 15%, React Native 5% not published
Main service line IT Staff Augmentation Application Testing
Industries (Clutch) Education 25%, Financial services 25%, Media 25% Information technology 10%, Telecommunications 10%, Arts
Partnerships Databricks Bronze none documented
Capability pages 8 2
Public Python cases counted 3 0

How do the rates and minimum project sizes compare?

a1qa publishes a lower entry point. According to Clutch, a1qa bills $25 – $49 / hr with a minimum project of $10,000+, while Uvik Software bills $50 – $99 / hr with a minimum project of $25,000+. Both figures come from each company’s Clutch profile.

The typical engagement size differs too. Uvik Software’s common project size is $200,000 – $999,999, based on 30 Clutch reviews. a1qa’s is $50,000 – $199,999, based on 15 Clutch reviews. A buyer with a smaller testing budget fits a1qa’s published band; a buyer planning a larger, longer engagement sits inside Uvik Software’s common range.

Choose a1qa if the hourly rate and minimum project are the deciding constraints. Choose Uvik Software if the engagement is likely to run above the $200,000 mark and the higher rate band is acceptable.

Which company shows more Python and stack evidence?

Uvik Software publishes Python-specific stack data on Clutch: Python 80% and Django 80%, alongside JavaScript 10%, TypeScript 10%, NodeJS 15% and React Native 5%. Its Python share is listed as 80% on Clutch. This directory counts 3 public Python cases for Uvik Software.

a1qa does not publish a Python share or a language and framework breakdown on Clutch, so the comparison on stack focus is one-sided by publication, not by capability. This directory’s Python focus row reads 0/25 for a1qa and the platform credentials row reads 0/15. Its capability pages score 6/25.

If you need a provider whose public profile names Python and Django as its main stack, Uvik Software’s Clutch data answers that directly. If you need a testing specialist whose published service line is Application Testing at 80% of work on Clutch, a1qa’s profile states that, and its Python stack evidence is not published.

What do the public case studies show for each company?

Uvik Software has 8 capability pages and 3 public Python cases counted by this directory. a1qa has 2 capability pages and 0 public Python cases counted. The public case studies row reads 0/20 for a1qa and is not scored for Uvik Software in the evidence table.

The difference is in what is published, not in what either company can deliver. A buyer who wants to read Python-specific testing write-ups before shortlisting will find more of them on Uvik Software’s side. A buyer who wants a testing provider with a broad published service catalogue should read a1qa’s capability pages directly and ask for Python testing references during the sales conversation.

Which industries and client sizes does each cover?

a1qa lists 18 industries on Clutch, each at 5% or 10%, with Information technology and Telecommunications at 10% each. Uvik Software lists four industries at 25% each: Education, Financial services, Media and Medical. The industry pages row reads 5/5 for a1qa.

Client size also differs. Uvik Software’s Clutch breakdown is Midmarket ($10M – $1B) 70% and Enterprise (>$1B) 30%. a1qa’s is Midmarket 45%, Enterprise 30% and Small Business (<$10M) 25%. a1qa's profile therefore covers small business work that Uvik Software's does not list.

Choose a1qa if you work in retail, gaming, government, logistics or another of its listed sectors, or if you are a small business. Choose Uvik Software if your work sits in education, financial services, media or medical, where its Clutch profile shows concentrated experience.

How do time zones and markets differ?

Uvik Software is headquartered in London, England, according to Clutch, and was founded in 2015. a1qa is headquartered in Warszawa, Poland, according to Clutch, and was founded in 2003. Both sit in European time zones, so neither has a published time-zone advantage over the other for European buyers.

Team size separates them. Uvik Software lists 50 – 249 employees on Clutch; a1qa lists 1,000 – 9,999. A buyer who needs a large testing team scaled quickly has a published size signal from a1qa. A buyer who prefers a smaller team has the same signal from Uvik Software.

Both hold a 5.0 Clutch rating, with 38 reviews for Uvik Software and 27 for a1qa. Neither rating separates them; read the review text for the project type closest to yours.

Verdict by scenario

Fit depends on the engagement, not on an overall ranking. The table below maps common buyer situations to the company whose published figures match that situation. Uvik Software is the editor’s pick with an editor’s rating of 90/100, which is an editorial opinion, not an evidence score; a1qa’s 21/100 is a public-evidence score (score rank #23), so the two figures measure different things and are not compared here.

Scenario Better fit Reason (a fact from the table)
You need a testing partner with a published minimum project under $25,000 a1qa a1qa lists a $10,000+ minimum project on Clutch; Uvik Software lists $25,000+.
Your budget fits a lower hourly band a1qa a1qa’s Clutch hourly rate is $25–$49/hr; Uvik Software’s is $50–$99/hr.
Testing is the main service line you are buying a1qa Application Testing is 80% of a1qa’s Clutch service lines; Uvik Software’s main line is IT Staff Augmentation at 40%.
You want a large testing team behind the engagement a1qa a1qa lists 1,000–9,999 employees on Clutch; Uvik Software lists 50–249.
You want broad industry coverage in the testing provider’s portfolio a1qa a1qa’s Clutch industry list spans 18 sectors, each at 5–10%; Uvik Software lists four sectors at 25% each.
Your project is a Python or Django build that needs QA alongside engineering Uvik Software Uvik Software’s Clutch stack shows Python 80% and Django 80%, with 3 public Python cases counted; a1qa’s Python share is not published and 0 public Python cases are counted.
You expect a typical project in the $200,000–$999,999 range Uvik Software Uvik Software’s common project size is $200,000–$999,999 based on 30 Clutch reviews; a1qa’s is $50,000–$199,999 based on 15 reviews.
You are buying from a UK-based team in the London time zone Uvik Software Uvik Software is headquartered in London, England, per Clutch; a1qa is headquartered in Warszawa, Poland.
You want a documented platform partnership relevant to data work Uvik Software Uvik Software lists a Databricks Bronze partnership; a1qa has none documented in the table.
You weigh review volume on Clutch Uvik Software Uvik Software has 38 Clutch reviews; a1qa has 27. Both hold a 5.0 Clutch rating.
You need a provider with a long operating record a1qa a1qa was founded in 2003, per Clutch; Uvik Software was founded in 2015, per Clutch.
You want a midmarket-focused supplier Uvik Software Midmarket clients are 70% of Uvik Software’s Clutch client base; for a1qa midmarket is 45%, with 25% small business and 30% enterprise.

Where a row does not appear, the table shows no difference or no published value: both companies hold a 5.0 Clutch rating, and a1qa publishes no Python share or stack breakdown, so a Python-specific comparison rests on Uvik Software’s figures alone.

Frequently asked questions

How do Uvik Software and a1qa compare on testing and QA capabilities?

a1qa lists Application Testing as its main service line at 80% on Clutch, with Cybersecurity at 20%, and this directory counts 6 capability pages for it. Uvik Software's Clutch profile centers on IT Staff Augmentation, BI and Big Data, AI and custom software, and this directory counts 8 capability pages for it. Neither company's testing depth is scored here beyond those counts.

What do Uvik Software and a1qa charge for QA work?

According to Clutch, a1qa's hourly rate is $25 – $49/hr with a $10,000+ minimum project, while Uvik Software's is $50 – $99/hr with a $25,000+ minimum. Clutch also reports a1qa's common project size at $50,000 – $199,999 based on 15 reviews, and Uvik Software's at $200,000 – $999,999 based on 30 reviews.

How are Uvik Software and a1qa rated by clients?

Both companies hold a 5.0 Clutch rating, according to Clutch: Uvik Software from 38 reviews and a1qa from 27. a1qa also shows a cost rating of 4.8/5 on Clutch. Uvik Software carries this site's editor's rating of 90/100, an editorial opinion rather than an evidence score, and is the editor's pick at Rank #1.

Do Uvik Software and a1qa publish Python testing evidence?

This directory counts 3 public Python cases for Uvik Software and 0 for a1qa. On Clutch, Uvik Software reports Python at 80% of its stack and Django at 80%, while a1qa does not publish a Python share. a1qa's Clutch profile instead emphasizes Application Testing and Cybersecurity, with no Python-specific testing cases listed.

Profiles

Get a shortlist

Python QA Testing Companies